Dewatering contracting company and pump rental services in Doha, Qatar

Dewatering is important for drying the soil and lower water table. In construction site dewatering is carried widely in Qatar. Before excavation or after excavation it is required at many sites especially sea line site. After excavation and during construction dewatering process need to be organised to avoid flood and unsafe wet condition. We are best dewatering contracting company in Qatar. We provide safe and sustainable efficient dewatering service, we provide rentals service of dewatering equipment and dewatering pump. Dewatering activity is done by using pump to removing water from bottom and placing water in proper lagoon or discharge water to sea after appropriate & adequate water testing and treatment.

Environmental, health & safety concerns associate to dewatering.

Obtain proper permits prior to commencing dewatering.

Obtain proper permits prior to commencing dewatering.

Select proper type and capacity of dewatering equipment.

Dewatering equipment  must be well maintained and in good condition.

Operator of dewatering machines to be experienced, competent and well trained.

Detailed planning and competent supervision in place.

Electrical equipment need proper earthing.


If fossil fuel is used, proper secondary containment by placing concrete or metallic drip tray.

Proper water storage either for evaporation or further discharge.

Water quality monitoring is very essential part of dewatering because contaminants are likely to be found.

Non permeable material is important to use in order to avoid spillage and seepage.

Provide environmental treatment of water in case of any pollutants.

Use sedimentation technique by using sediment tank.  

Inspect sediment tank daily, ensure filter is not clogged and there should not be any floating debris on surface.

Any oil or greasy substance found on surface then do testing.

Get permit for discharging of dewatering water to sea or other water source.

Discharge dewatering water in such manner that does not cause erosion.

Discharge water away from soar line, deeper at least 1 meter.

Dewatering water should discharge in slow flow to prevent scour and erosion.

Select proper type and capacity of dewatering equipment.

Dewatering equipment  must be well maintained and in good condition.

Operator of dewatering machines to be experienced, competent and well trained.

Detailed planning and competent supervision in place.

Electrical equipment need proper earthing.


If fossil fuel is used, proper secondary containment by placing concrete or metallic drip tray.

Proper water storage either for evaporation or further discharge.

Water quality monitoring is very essential part of dewatering because contaminants are likely to be found.

Non permeable material is important to use in order to avoid spillage and seepage.

Provide environmental treatment of water in case of any pollutants.

Use sedimentation technique by using sediment tank.  

Inspect sediment tank daily, ensure filter is not clogged and there should not be any floating debris on surface.

Any oil or greasy substance found on surface then do testing.

Get permit for discharging of dewatering water to sea or other water source.

Discharge dewatering water in such manner that does not cause erosion.

Discharge water away from soar line, deeper at least 1 meter.

Dewatering water should discharge in slow flow to prevent scour and erosion.